QWinOut DIY 2.4G 8CH KK V2.3 F450 Frame RC Quadcopter 4-Axle UFO Unassembly Kit RTF/ARF Drone (KK FC Version)
(as of Nov 29,2022 18:24:58 UTC – Details)
Unassembled DIY Version, Need client to assemble the Whole set.
1. Do not modify any parameters and wiring without knowing the flight control and remote control.
2. The product is already welded, you only need to assemble it, and bind the receiver with transmitter, then could fly.
3. Do not charge the battery when you are not at home. Do not charge the battery immediately after flying. Do not over-discharge the battery. (Over-discharge may cause the battery to be charged and become obsolete.) If the battery is fully charged, it may not be charged for a long time.
4. Turn on the remote control before powering the aircraft. After the flight is over, unplug the power supply and turn off the remote control to prevent accidents.
5. You can fly it on open space when there is no wind, do not fly in the crowd and surrounding areas with interference.
6. The product is unassembled. Please watch the teching video before you assemble it, we have the instructions, which would come with the products, and we have a professional dedicated technical team to help solve the relevant questions.
7. If the customer needs to assemble, we will give a reasonable quotation for additional logistics freight and technical assembly fees.
8. This product is not a toy and is not suitable for children under 14 years old.
9. If you are a beginner, it is recommended to be assisted by experienced adults.
10. Novices should pay attention to the fact that when the plane is turning, do not take the plane with your hand or let the child take it to prevent it from being scratched.
11. When the aircraft falls into the wall or hit other objects at high altitude, please close the start switch in time. Otherwise, it may cause damage to the flight control motor. Check the aircraft for damage. If the screw is loose, wait until everything is normal before you can take off again.
Flight Control: QWinOut V2.3 KK Flight Control
Motor: A2212 1000KV Brushless Outrunner Motor 13T
ESC: 2-4S 30A RC Brushless ESC Simonk Firmware with 5V 3A BEC
Paddle: 1045 Plastic 2-blade paddle
Battery / Power: 11.1V 2200mah 20c
Flight time: 8-12 minutes (the specific flight time depends on the movement of your flight)
Remote control distance: 500 meters in the air (the actual flight distance is related to the environment)
Loading weight: less than 500g
1* HJ 450 F450 Nylon Fiber Flamewheel Frame with T Plug Male Connector Silicone Wire
4* A2212 1000KV Motor with installed base and welded with male banana bullet
4* 30A ESC welded with female banana bullet
1* KK V2.3 Flight Control
2* Set of CW CCW 1045 Propeller
1* 11.1V 2200mah 20c lipo battery with Battery Cable tie
1* Radiolink T8FB 2.4GHz 8Ch RC Transmitter and R8EH Receiver
1* Other accessories: rubber pad and locking rope
1* Simple assemble manual
Plastic + Glassfiber Plastic Metal Copper clad laminate Plastic Plastic
1 1 1 1 1 1
We are a professional drone manufacturer and supplier.
My shop has many different types of drones.
Welcome to consult and purchase！
HJ 450 Multicopter 450F nylon Fiber Frame Airframe kit Strong Smooth for DIY RC KK AMP2.8 MK MWC DIY Quadcopter plane
Colored arms for orientation to keep you flying in the right direction, and large mounting tabs on main frame bottom plate for easy camera mounting.
30A Brushless ESC Speed Controller For RC Quadcopter Hexacopter. Before Producing, The Manufacturer Have Set Up The Program:Simonk Firmware, The Esc Do Not Need Additional Program.